Novel approach of generating molybdenum oxide thin films via spark plasma ablation deposition

Design, synthesis and characterization of symmetric and asymmetric squaraines for photovoltaic application

Modeling of inorganic perovskite photovoltaics

Analysis of energy losses in squaraine solar cells through light intensity measurements

Squaraine-Based Small Molecule BHJ Absorbing Layers for Organic Thin-Film Solar Cells

Novel ambient-condition solid-state synthesis route of nanocrystalline TiN thin films via spark plasma ablation deposition

2nd ACDC 2025 Book of Abstracts

The corrosion contribution behind chemical homogeneity in the wet stage of the preparing of mullite ceramics

Impact of ceramic membrane pore size and metal oxide modifications on pharmaceutical degradation in a hybrid ozonation–membrane filtration reactor

Nitride Quantum Dots for Rapid and Sensitive Explosive Detection

Priprava filmova titanijeva oksida tehnikom nanošenja ablacije iskrom

Calorimetric study of the pozzolanic potential developed by the mechanochemical activation of kaolin clay

Development of thin film bulk heterojunction organic solar cells based on novel squaraine derivatives

Nevidljive mreže na površinama - Festival znanosti 2025

Dan otvorenih vrata 2025 - Nevidljiva znanost

Development of Energy Autonomous Nanosensors

Designing sustainable packaging materials: citric acid-modified TPS/PLA blends with enhanced functional and eco-performance

Mott law exp(T0/T)1/4 and scaling properties of the oxygen-deficient tenorite CuO0.75

Sol-Gel Synthesis Optimization of Nickel Oxide Thin Films for Enhanced Optoelectronic Applications

Aerosol direct writing of titanium oxide nanoparticles synthesized by spark ablation

Dekoriranje nanostrukturiranih cinkitnih filmova s CdSe kvantnim točkama

Modeling of inorganic perovskite photovoltaics

Hybrid Ozonation–Membrane Filtration for Pharmaceuticals Degradation: The Role of Modified Ceramic Membranes in Enhancing Ozone Efficiency

Long-term chemical solubility of 2.3Y-TZP dental ceramics

Acidic pathway in formation of SiO2–AlO2–PO2 geopolymeric ceramic: Investigation of structural evolution and electrical behaviour

Investigation on the corrosion behavior and mechanical properties of Nd-Fe-B magnets diffused by electrophoretic deposited TbF3

International Workshop on Advanced Technologies and Mobile Laboratories for Countering Chemical Threats

Advancements in nanostructured functional constituent materials for gas sensing applications: a comprehensive review

Nanostructured barium titanate interfaces for tailoring charge transfer phenomenology in thin film solar cells

International Workshop on Advanced Technologies and Mobile Laboratories for Countering Chemical Threats Book of Abstract

Structural evolution of MoOx thin films generated by spark discharge deposition for gas sensing and photocatalytic application

Preparation of cellulose aerogels as templates for the preparation of tin(IV) oxide as an efficient photocatalyst

SINTEZA RAZLIČITIH UGLJIKOVIH NANOSTRUKTURA KONTROLOM PARAMETARA DEPOZICIJE METODOM ABLACIJE ISKRE

Comprehensive study of stereolithography and digital light processing printing of zirconia photosensitive suspensions

Spark Ablation as a building block for nanostructured multifunctional devices

Catalytic ozonation of pharmaceuticals using CeO2-CeTiOx-doped crossflow ultrafiltration ceramic membranes

Razvoj i primjena sustava za sušenje pri superkritičnim uvjetima

USPOREDBA PRISTUPA PRIPRAVE PREDLOŽAKA ZA RAST TANKIH FILMOVA NANOSTRUKTURIRANOGA ZnO

Plasma-treated 1D transition metal dichalcogenides for efficient electrocatalytic hydrogen evolution reaction

Carbonation study of new calcium aluminate cement-based CO2 injection well sealants

Utjecaj dopanata na kristalizaciju β- trikalcijevog fosfata

Priprava i karakterizacija geopolimernih filmova

Izrada hijerarhijskih nanostruktura titanijeva oksida metodom žrtvenog predloška nanostrukturiranog filma cinkita

Synthesis, characterization, and photocatalytic properties of sol-gel Ce-TiO2 films

Bio-based aerogels in energy storage systems

Sol-gel synthesis of zinc alumotitanate, monitoring of chelation, hydrolysis, condensation, and crystallization processes

Thermal and thermomechanical analysis of amorphous metals: a compact review

Razvoj i primjena sustava za sušenje pri superkritičnim uvjetima

Izrada hijerarhijskih nanostruktura titanijeva oksida metodom žrtvenog predloška nanostrukturiranog filma cinkita

Implementation of spark discharge methodology into fast scanning calorimetry for the case of nanoscale homogeneous alloy materials

Addressing of different synthetic and shaping approaches for β-tri calcium phosphate macro-microporous scaffold fabrication

A GISWAXS study on supramolecular assembly of small molecule electron donating photoabsorbers

Improvement on corrosion resistance of sintered Nd-Fe-B with bilayer Al/Cr thin films

Mechanochemical approach for the synthesis of LTA and SOD zeolites from (meta)kaolin

Mechanochemical approach in zero waste synthesis of geopolymer-zeolite composite

Properties of sol-gel Ce-TiO2 film

Regeneration and reuse properties of the highly effective electrochemically-derived nanostructured ordered titania photocatalyst

Application of intensive grinding in obtaining metakaolin and zeolite

Cellulose II highly porous materials as sound absorbers

Optimisation of environmentally friendly tool for geopolymer and zeolite preparation from kaolin

Testing of acoustic properties of cellulose aero- and cryogels

8th ECERS Book of Abstracts

Dielectric properties of porous silico-aluminophosphate geopolymeric ceramic-like material

Defect engineering of titanium oxide thin films printed via one-step reactive spark plasma discharge coupled with aerosol direct writing

Cellulose aerogels and their acoustic properties

Aspects and challenges of nanostructured metal oxide thin films

Optimisation of environmentally friendly tool for geopolymer and zeolite preparation from kaolin

Preparing an efficient photocatalyst from SnO2 modified cellulose II highly porous template

Self-organisation phenomenology behind effective photocatalytic/photovoltaic thin films

Optimization of bulk heterojunction layer constituents in organic photovoltaic devices

Development of tin(IV) oxide nanorods as potential layer in solar cells

Imaging of the perovskite solar cell comprising nanostructured electron transfer layer

Sinteza i izrada makroporozne bioaktivne keramike

Lateral and vertical evolution of the compositional and morphological profiles in nanostructured photocatalytic titania thin films

Cellulose aerogels – SnO2 composites as potential photocatalysts

Shifting the paradigm for the case of advanced nanomaterials being barely perceived as ceramic materials

Bacteria and yeasts isolated from the environment in biodegradation of PS and PVC microplastics: screening and treatment optimization

Biodegradation of LDPE_TPS blends under controlled composting conditions

Breakdown of the anodized nanostructured anatase for photovoltaic devices: The effect of water content in the electrolyte on preparation of large surfaces of nanotubes

CdSe QDs modified cellulose microfibrils for enhanced humidity sensing properties

Utilization of conventional PXRD apparatus for characterization of thin-films using reconsidered equations for XRR

Hydrothermally-derived silver-decorated nanocrystalline anatase photocatalyst for Reactive Violet 2 photodegradation

Thermal evolution of gels prepared by chelation of aluminum sec-butoxide with ethyl acetoacetate in various amounts

Thermal stability and properties of Pd/CeAlO3 catalyst prepared by combustion synthesis

Monitoring the electrical properties of Zeolite A obtained by mechanochemical synthesis in thin-film configuration

Influence of manganese content on martensitic transformation of Cu-Al-Mn-Ag alloy

Utilization of spark discharge deposition in ultrafast thermal characterization suitable for nanoscale materials

Influence of mechanochemical activation on the degree of amorphisation and pozzolanic activity of kaolin

In-situ structural degradation study of quadruple-cation perovskite solar cells with nanostructured charge transfer layer

Spark plasma synthesis of defective titanium oxides: phenomena and peculiarities

Monitoring of the conductivity properties with respect to the development of geopolymer network

Vilko Mandić: Savjetujem mladima što više paralelnih istraživanja!

Preparation of nanostructured SnO2 thin-films as efficient electron transport layers for perovskite solar cells

Pre and post processing of the substrates and surfaces for interface stability engineering in perovskite solar cells

Computational approach for electrical conductivity of geopolymer-graphite composites

Geopolymeric synthesis pathway for porous SiO2-AlO2-PO2 ceramic-like material via replica shaping

Advanced visualisation and evaluation of smart nanostructured materials preferably derived by simple methods

Introducing photovoltaic functionality into humidity sensing composite thin films

Utilization of dual beam microscopies for describing of the defects between nanostructured organized charge transfer and perovskite photovoltaic layers

In situ mechanical testing of nanostructured zinc oxide thin films

Thermal stability and properties of Pd/CeAlO3 catalyst prepared by combustion synthesis

Geopolymer-zeolite composites for photocatalysis

Optimisation of the electron transport layers in lead-free perovskite solar cells

Incorporation of spark ablation and nanoscale 3D printing for deriving nanostructured layers

Showcase for material science R&D at FCET for increasing participation in EU funding schemes

Optical and electrical study of amorphous titanium oxide thin films derived by reactive spark ablation

Current and future mobility and networking opportunities in Croatia for students and ECI researchers

Optimization of novel squaraine derivatives: configuration and interfacing

On the importance of structural analysis for understanding the morphology of squaraine based bulk heterojunction organic solar cells

Implementing ordered arrays of zincite nanoformations into transport layers of perovskite photovoltaic devices

Potentiostatic vs. galvanostatic approach for growth of the titania nanostructured arrays via electrochemical etching of titanium films deposited by magnetron sputtering

Development of nanoporous crystalline thin films by spark plasma discharge

Development of geopolymer network and following influence on conductivity properties

Experimental and theoretical study of aluminosilicate gel

Understanding configuration of geopolymer materials for application in solar-cells

The potential use of spark ablation in development of AgNP decorated copper oxide thin films for photodetection applications

Showcase of tools for preparing, modifying and describing thin films for energy conversion devices with special attention on plasma phenomenology

Nanostructured TiO2 photocatalysts modified with Cu for imidacloprid degradation

B-TCP porous scaffolds with controlable macro- microporosity prepared by PU replication method assisted by vacuum

Demystification of the routes behind chemical deposition and growth of AZO films suitable for photovoltaics

Broad compositional range and post treatment of DC magnetron sputtered AZO films

Tin(IV) oxide nanostructured thin-films development as a potential layer in solar cells

Morphology related energy losses in small molecule organic solar cells

Reusing waste coffee grounds in the preparation of porous alumina ceramics

Novel squaraine-based organic systems for application in organic photovoltaic devices

Sol–gel synthesis of manganese-doped ceria from acetylacetonate precursors

Microwave-assisted synthesis of N/TiO2 nanoparticles for photocatalysis under different irradiation spectra

Synthesis and structural characterization of phosphate-based geopolymers

Influence of the electron transport layer pre- treatment on the efficiency of perovskite solar cells

Tin oxide as electron transport layer for perovskite solar cells

Perovskite photovoltaic devices without hysteresis issues based on 1D zincite

Mullite based geopolymer materials developed in a thin-film configuration suitable for the application in vertically mounted solar cells

The role of solvent selection and post processing treatment in controling morphology of bulk heterojunction squaraine organic solar cells

Passivation of electron transport layer to achieve better efficiency of perovskite solar cells

Geopolymer materials developed in a configuration suitable for photovoltaic application

Improving photocatalytic performance of immobilised nanostructured titanium dioxide thin- films by Cu nanoparticles modification

Utjecaj srebra na legure s efektom prisjetljivosti oblika na bazi bakra

Nanostructured Zincite Thin-films Modified with Squaraines for Solar Energy Harvesting

Utilisation of ceramic thin-films for sensing humidity at room temperature

Synthesis and nanoarchitectonics of novel squaraine derivatives for organic photovoltaic devices

Influence of the titanium pretreatment on the yield titania nanotube properties

Photocatalytic degradation of ciprofloxacin by sol-gel derived Ce-doped TiO2 films

Hybrid cellulose-QDs composites – from synthesis to characterisation and possible application

Dependence of morphology of titanate nanotubes on electrochemical etching synthesis temperature

Fabrication of cerium oxide films with thickness and hydrophobicity gradients

Humidity sensing ceria thin-films

Influence of the additives on geopolymer thin-films and their electrical performance

Structural and electrical point of view on addressing the organisation of the constituting domains in DC magnetron sputtered AZO films

Combining nanoscale 3D printing with spark ablation to achieve novel nanostructured surfaces for photovoltaic applications

Thermal stability and utilization of 1D-nanostructured Co3O4 rods derived by simple solvothermal processing

Synthesis of porous phosphate-based geopolymers via replica shaping for potential application in biomedicine

Nanostructured ZnO electron transporting materials for hysteresis-free perovskite solar cells

SnO2-Cellulose nanofibrils (CNF) composites – influence of the structure on the applicability

Wet chemistry synthesis, deposition and characterisation of materials for gas sensors

Doped ceria nano catalysts

Reactive spark ablation deposition and subsequent thermal conversion of copper oxide porous thin-films

The development of geopolymer materials into thin- films for the application in vertically mounted solar cells

Nanostructured SnO2 thin-films for solar cells

Tailoring microstructural, textural and thermal properties of γ-alumina by modifying aluminum sec-butoxide with ethyl acetoacetate within a sol–gel synthesis

The role of thermal processing for achieving homogeneity of magnetron sputtered AZO films

Comparison of Erosion Rate of Slip Cast Monolithic and Composite Ceramics

Biodegradable polymer blends based on thermoplastic starch

Cellulose aerogels – from characterisation to implementation

PREPARATION AND CHARACTERIZATION OF POROUS ALUMINA CERAMICS USING WASTE COFFEE GROUNDS (WCG)

Spontaneous adsorption-induced Salvinia-like micropillars with high adhesion

Breakdown of the anodized nanostructured anatase for photovoltaic devices: the effect of electrolyte composition on preparation of large surfaces of nanotubes

Thermal analysis of sol-gel derived precursors for alkali activated materials

Geopolymer paste in solar-cell system: how to make it possible?

Structural and electrical characterization of pure and Al-doped ZnO nanorods

Development of nanostructured transparent electrodes for solar cells based on aluiminium doped zincite

ADVANCED IN-SITU ELECTRON MICROSCOPY ANALYSIS OF THE NANOSTRUCTURED SEMICONDUCTING ZINCITE THIN-FILMS

Pripreme proba polimernih otpresaka i pokusa stvaranja mješavina za kolektor

In-situ nanoindentation electron microscopy of the nanostructured semiconducting zincite thin-films

Influence of Al doping on morphology and electrical properties of ZnO nanorods

Comparison of amine and sulphide layer-by-layer synthetic route for preparing of the photovoltaic CdSe quantum dots thin-films

Ispitivanje utjecaja temperature na rast titanijevih nanocjevčica metodom anodizacije

Korištenje ključnih tehnika NBKO-a: FTIR

Priprava nanostrukturiranih filmova kositrova oksida

Porous SnO2-modified cellulose photocatalysts derived by non-hydrolytic sol-gel freeze-drying

Nanošenje filmova bakrova oksida metodom ablacije iskrom

1st ISMEC – NECTAR Training School on the Determination, Analysis and Use of Thermodynamic Data SOLvE – Advances in SOLution Equilibria

Thermal stability and utilisation of 1D- nanostructured Co3O4 rods derived by simple solvothermal processing

The effect of waste coffee ground on the porosity and structure of slip cast alumina ceramics

Small molecule photoabsorbers for application in photovoltaic devices

Lightweight Concrete Foam from Saponified Almond Shell Extract

Rapid microwave-assisted synthesis of Fe3O4/SiO2/TiO2 core-2-layer-shell nanocomposite for photocatalytic degradation of ciprofloxacin

Structural characterization of sol-gel TiO2 and CeO2 coated ceramics membranes

1st ISMEC – NECTAR Training School on the Determination, Analysis and Use of Thermodynamic Data SOLvE – Advances in SOLution Equilibria

Designing a hybrid ozonation-filtration process using modified ceramic membranes for increasing the hydroxyl radical yield in wastewater treatment

Modeliranje NBKO laboratorija

Assessment of thin-films for thermochromic application using an in-operando approach

Addressing of different synthetic and shaping approaches for preparing beta-TCP-based substrates for biomineralisation of HAP

Nanocellulose-QDs composites: Future in a foam

Removal of pharmaceuticals from water by tomato waste as novel promising biosorbent: equilibrium, kinetics, and thermodynamics

Thermal evolution of gels prepared by modification of aluminum sec-butoxide with ethyl acetoacetate intended for use as ceria catalyst carriers

MOx-CeO2-Al2O3 catalysts for soot oxidation process

N/TiO2 nanocomposites: microwave-assisted synthesis, characterization and photocatalytic activity

Conventional and non-conventional sintering techniques of high purity alumina ceramics

Mechanochemical synthesis of manganese doped ceria nanoparticles

Sol-gel Synthesis and Characterization of Lithium and Cerium Codoped Perovskite

Sol-gel synthesis of cerium(IV)oxide

Synthesis and characterization of copper doped ceria nanocatalyst

Computational Methods 2020

Modelling of simultaneously obtained small and wide angle synchrotron-radiation scattering depth profiles of ordered titania nanotube thin films

Characterization of Alumina Granules Obtained by Spray Drying Process

Intensification of dihydroxybenzenes degradation over immobilized TiO2 based photocatalysts under simulated solar light

Carbonation of Portland-Zeolite and geopolymer well-cement composites under geologic CO2 sequestration conditions

Crystallisation of intermediate complexes for controlling of hydrolysis rate and network morphology in the course of the sol-gel process

Nanostructured photocatalytic TiO2/SnO2 composites

A comparative study of hydrothermally derived Mn, Fe, Co, Ni, Cu and Zn doped ceria nanocatalysts

Nanostructured transparent electrodes for solar cells based on aluminium doped zincite

Impedance spectroscopy for Solar Cells: Electrical Properties of Nanostructured Electrodes Based on Aluminium Doped Zincite

Nanošenje filmova metodom ablacije iskrom

Characterization of sol-gel-derived ceria nanoparticles doped with manganese

How to improve the reproducibility of synthesis of nanostructured functional materials

Manganese-doped, hydrothermally-derived ceria: The occurrence of birnessite and the distribution of manganese

Temperature resolved impedance spectroscopy: a powerful tool for investigating electrical transport in nanostructured electrodes for solar cells

Characterization of Alumina Granules Obtained by Spray Drying Process

Optimisation of preparation of the synthetic geopolymers in a thin-film configuration

In-operando diffraction and spectroscopic evaluation of pure, Zr-, and Ce-doped vanadium dioxide thermochromic films derived via glycolate synthesis

Titania-coated alumina foam photocatalyst for memantine degradation derived by replica method and sol-gel reaction

Hardness and indentation fracture toughness of slip cast alumina and alumina-zirconia ceramics

Tailoring thermal development of gamma alumina sorbents material using combustion synthesis: the effect of amino acids (G, A, N) and equivalence ratio

Korelacija DRS-UV-VIS i ATR-FTIR spektroskopija kobaltom dopiranog ganita

Teorija i praksa dizajna i sinteze fotoaktivnih materijala - malih molekula - simetričnih skvaraina za primjenu u hibridnim-organskim solarnim ćelijama

Sinteza nanostrukturiranih stupića cinkita dopiranih ionima aluminija

Development of phases in the sol-gel derived mixed-metal-oxide (Al2O3–TiO2–ZnO) functional sorbent material

Preparation and photocatalytic application ot TiO2 film coated alumina foam

Ispitivanje sustava Mn-Al-Zn-oksida kao sorbensa za primjenu u procesu visoko-temperaturne desulfurizacije plina

Mechanochemical synthesis of zincite doped with cadmium in various amounts

Strukturna karakterizacija različitih granita

Strukturna analiza starenja baruta

Materijali za visokotemperaturne prevlake turbina mlaznih motora

Optička svojstva materijala vojnih maskirnih uniforma

Tuneable solid-state emitters based on benzimidazole derivatives: aggregation induced red emission and mechanochromism of D-π-A fluorophores

Optička svojstva materijala vojnih maskirnih uniforma

Određivanje zabranjene zone poluvodiča metodom UV- Vis difuzne refleksijske spektroskopije

ZnO@TiO2 core shell nanorod arrays with tailored structural, electrical, and optical properties for photovoltaic application

Synthesis of TiO2-rGO nanocomposites as photocatalysts for the degradation of methylene blue dye in water

Development of phases in the sol-gel derived mixed-metal-oxide (Al2O3-TiO2-ZnO) functional sorbent material

Combustion synthesis of Al2O3 with asparagine as fuel

Preparation and photocatalytic application ot TiO2 film coated alumina foam

Multinuclear magnetic resonance study on aluminium sec-butoxide chelated with ethyl acetoacetate in various amounts

Synthesis of TiO2-rGO nanocomposites as photocatalysts for the degradation of methylene blue dye in water

Nanostructured electron transport layers in PSC

Utilisation of complexation for gaining control over hydrolysis in the course of the sol-gel process

Thermal analysis of hydrothermally-derived, manganese-doped ceria

Hydrothermally-derived ceria doped with manganese in various amounts

The role of amino acids (G, A, N) in the wet chemistry synthesis and thermal development of gamma alumina with specific morphology

Nanostructured zinc oxide as electron transport layer in perovskite solar cells

Efficiency of TiO2 catalyst supported by modified waste fly ash during photodegradation of RR45 dye

Mechanochemical synthesis of cadmium doped ZnO nanoparticles

The role of fly ash in solar photocatalytic water treatment

Modifikacija sastava elektrolita kao metoda kontrole morfologije titanatnih filmova

Alumina combustion synthesis

Preparation of a PANI/ZnO composite for efficient photocatalytic degradation of acid blue

Preparation of Alumina Foams by the Polyurethane Sponge Replica Method

Sol-gel synthesis and properties of lithium and cerium codoped perovskite

Modelling of simultaneously obtained small and wide angle synchrotron-radiation scattering depth profiles of ordered titania nanotube thin films

Addressing boundary problems in solar cells by introducing ferroelectric modification to the nano-structured layer of charge transfer oxide material

Reinforcing blade-cast photocatalytic-titania thin film by titanate nanotubes

Zinc correlating between nano-, eco-, bio-, smart- and simillar materials

Iskorištavanje ili zbrinjavanje opasnih industrijskih nusprodukata

Nano-strukturirani materijali koji se mogu iskoristiti kao NBKO senzori

The utilisation of the sol-gel process in the preparation of advanced multi-layered multifunctional coating

Modeliranje procesa priprave aerosola

Catalytic activity and related properties of sol–gel-derived manganese-doped gahnite

Optimiranje tijeka rasta uređenih cjevčica titanijeva oksida elektrokemijskim putem kao funkcije sastava elektrolita

Photocatalytic activity of synthesized titanate nanotubes and nanoribbons vs. commercial TiO2 under artificial solar and visible irradiation using 17β-estradiol as model micropollutant

Titanium dioxide nanotube array thin films for photovoltaic application

The influence of filler treatment on the mechanical properties and phase behavior of thermoplastic polyurethane/polypropylene blends

Low thermal treatment optimisation of sol-gel derived composite-coating for multi-purpose functionality and protection of all-metals

Tailoring Perovskite-Type Core-Shell Nanoarchitecture of Charge Transfer Layer in Solar Cells

Development of the multilayer container-type protective-coating under lower thermal treatment requirements

Comminution kinetics of α and γ-glycine polymorphs in a planetary ball mill

Tailoring anatase nanotubes for the photovoltaic device by the anodization process on behalf of microstructural features of titanium thin film

The influence of thermal annealing on the structural, optical and electrical properties of AZO thin films deposited by magnetron sputtering

The properties of magnetron sputtered AZO thin films annealed in a H2 atmosphere

Thermal and structural studies of sol–gel-derived yttria-doped ZrO2 nanoparticles: Effect of annealing condition

Influence of titanium doping on the Raman spectra of nanocrystalline ZnAl2O4

The utilization of modified alkoxide as a precursor for solvothermal synthesis of nanocrystalline titania

Sol-gel preparation of nanocrystalline titania photocatalyst using ethyl acetoacetate modified Ti(n-BuO)4 precursor

Mullite ceramics acid corrosion kinetics as a function of gel homogeneity

The role of perovskite type of barium titanate buffer layer on hybrid solar cell performance

The electric parameters in interfacing of transparent conductive and charge transfer layers in solar cells

High surface area ceria nanoparticles via hydrothermal synthesis experiment design

Nanocrystalline anatase derived from modified alkoxide mesostructured gel

TiO2 nanotubes arrays on conductive glass as base for perovskite solar cells

Structural, optical and electrical properties of multilayer structures for solar cells formed on TiO2 nano-tubes

Corrosion protection of AISI 316L stainless steel with the sol-gel yttria stabilized ZrO2 films: Effects of sintering temperature and doping.

Taguchi design of ceria nanoparticles hydrothermal synthesis

Polymer-infiltrated titania nanotube-based hybrid organic solar cell investigation

The electric compatibility of TCO and CT layers in DSSC and OPV solar cells

Investigation of thermal decomposition of jarosite tailing waste: A prerequisite for comprehensive jarosite reuse and waste minimization

Crystallization pathway of sol–gel derived zinc-doped mullite precursors

The influence of thermal annealing on structural, optical and electrical properties of ZnO thin films deposited by magnetron sputtering

Microscopic study of TiO2 nanostructures formed by electrochemical method

Thin Films Interface Parameters in TiO2 Nanotube Based DSSC Solar Cell

The corrosion behaviour of monophasic and diphasic gel derived mullite ceramics in nitric acid

Proces regeneracije sorbensa sumpora na bazi cinkova alumotitanata

Thermal and structural studies of sol–gel derived yttria-doped ZrO2 nanoparticles: effect of annealing condition

Nanocrystalline anatase derived from modified alkoxide mesostructured gel

Titanate nanotubes: synthesis, characterization and photocatalytic activity

Wet chemistry approach for controllable synthesis of NiCo2O4 based supercapacitor active material

Catalytic oxidation of phenol over Cu/Y-5 zeolite based catalyst. Part 2: Influence of postsynthesis thermal and chemical treatment

Influence of various fluoride agents on working properties and surface characteristics of uncoated, rhodium coated and nitrified nickel-titanium orthodontic wires

The influence of solvents on sol–gel derived calcium aluminate

Karakterizacija cinkova alumotitanata

Thermal evolution process, properties and photocatalytic activity of sol–gel derived nanocrystalline anatase in dye degradation process

The preparation and characterization of titanate nanotubes

Thermal evolution, properties and photocatalytic activity of sol-gel derived nanocrystalline anatase

The effect of La2O3 addition on sol–gel derived mullitization

The role of solvents on sol-gel derived calcium aluminate (CA)

Sorption kinetics and structural investigations of acid and alkali-pretreated bentonite used for ammonium and phosphate removal from petrochemical wastewater

Ethyl acetoacetate ligand distribution in the course of titanium n-butoxide chelation

A structural investigation of tris(ethyl acetoacetate)aluminium (III)

Sol-gel Derived Mullite-gahnite Composite

Sol-Gel Derived Mullite-Gahnite Composite

Priprava superparamagnetskih nano-čestica tipa jezgra/ljuska

Alkalno aktivirana mineralna veziva

Thermal stability of commercial bentonites

Sol-gel derived mixed metal oxide sorbents for high temperature gas desulfurization

Acid corrosion behavior of sol–gel-prepared mullite ceramics with and without addition of lanthanum

Sol gel sinteza aluminijeva oksida

Povećanje učinkovitosti rada sušionika s raspršivanjem

Crystallization kinetics of sol-gel derived mullite-gahnite composite

Properties and antimicrobial activity of nanosilver deposited cotton fabric coated with γ-methacryloxypropyl trimethoxysilane

Sol-gel synthesis and characterization of lanthanum doped mullite

Sol-gel derived, paraffine and silica based phase change microcapsules

Investigating internal corrosion of liquid hydrocarbon pipeline by various techniques

Structural properties and photoluminescence of nanocrystalline gahnite doped with titanium

Lanthanum doped mullite

Vilemit dopiran ionima prijelaznih metala

Sol-gel derived, paraffine and silica based phase change microcapsules

Internal corrosion root cause analysis by multiple-technique characterization of sludge obtained from crude oil pipeline

Structure and microstructure of Ti-doped gahnite

Sol-gel sinteza i karakterizacija mulita dopiranog lantanom

Utjecaj procesa kalciniranja na tijek kristalizacije monofaznog premulitnog gela

The effect of annealing temperature on the structure and optical properties of sol–gel derived nanocrystalline cobalt aluminate spinel

Structure, microstructure and photoluminescence of nanocrystalline Ti-doped gahnite

Rendgenska difrakcija praha - Od X-radijacije do kvalitativne interpretacije

THE INFLUENCE OF CALCINATION TEMPERATURE ON SOL-GEL DERIVED MULLITE

Evolution of structural and optical properties in the course of thermal evolution of sol–gel derived cobalt-doped gahnite

Priprava i karakterizacija mikrokapsula parafina obloženih silika-gelom

Thermal evolution of sol-gel derived cobalt aluminate spinel

Influence of grinding of amorphous, sol-gel derived, premullite powder on structure and microstructure of sintered mullite

Sol-Gel Preparation, Structural, Textural and Performance Characterization of Mixed Metal Oxide Sorbents for High Temperature Gas Desulfurization

Evolved gas analysis of sol-gel derived precursors for ZnAl2O4 synthesis

Influence of agglomeration and contamination in the course of amorphous powder grinding on structure and microstructure of sintered mullite

Thermal evolution of calcium aluminate gel obtained from aluminium sec-butoxide chelated with ethyl acetoacetate

Mullite crystallization kinetics of lanthanum doped sol–gel derived precursors

Silver Nanoparticles / Cellulose Fabric / Polysiloxane Composite

Non-isothermal Crystallization Kinetics La2O3 Doped, Sol-gel Derived Mullite

The monitoring of the sol-gel synthesis of zinc titanate using spectroscopic methods

Diffuse Reflectance Spectroscopy analysis of sol-gel derived cobalt-doped gahnite

A spectroscopic study of calcium aluminate gels obtained from aluminium sec-butoxide chelated with ethyl acetoacetate in various ratios

Thermal evolution of calcium aluminate gel

Sol-gel sinteza manganom dopiranog ganita

Corrosion of lanthanum doped, sol-gel derived, mullite ceramics in nitric acid

Sol-gel synthesis and characterisation of nanocrystalline gahnite

The influence of La2O3 on sol-gel derived mullite densification behavior