Radiation effects on ceramics and its use in fusion reactors

Photocatalytic activity of strontium titanate

Tungsten-based high-entropy oxide for photocatalytic application

Sinteza bimetalnih nanočestica iz dimernih površinski aktivnih tvari koje sadrže metale

Raspršive antibakterijske prevlake temeljene na TiO2 nanomaterijalima

Modifikacija titanatnih nanomaterijala površinski aktivnim tvarima koje sadrže metale

Hydrothermal synthesis of tungsten-based high-entropy oxide

Coprecipitation synthesis of tungsten-based high-entropy oxide

Matrice za dostavu antibakterijskih nanočestica kod biomedicinskih implantata

Synthesis of metal nanoparticles from metallosurfactants

High entropy oxides: synthesis and applications

Površinski aktivne tvari koje u svojoj strukturi sadrže željezo

Determination of thin film bandgap by the use of Tauc's method

Solution-based synthesis of high-entropy oxide of transition metals

The preparation of strontium doped manganites for multiple applications

Parameters influencing the accuracy of pycnometer determination of powder density

Procedures for recycling perovskite photovoltaic cells

Instrumental Techniques in Determining the Composition of Historical Paper

Quantitative energy dispersive X-ray spectrometry

Determination of true powder density by use of laboratory glassware

Determination of amorphous phase content in manganites

Deposition of thin manganite coatings from solution onto a glass substrate

Self-assembly of dimeric metallosurfactants

Determination the composition of historical paper by use of instrumental techniques

Crystallization of thin manganite coatings using intense pulsed light

Hydrothermal synthesis of manganites

Determination of gel-time of epoxy resins

Application of ImageJ in characterization of materials

Phase separation in La0.5Sr0.5MnO3 system

Preparation of fine La1-xSrxMnO3 powders by milling

Determination of La1-xSrxMnO3 crystal lattice parameters by Rietveld refinement

Determination of oxygen nonstoichiometry in perovskites by permanganate titration

Development of nano-structured ZnO/TiO2 thin films for photovoltaic and photocatalytic applications

Influence of the reactants on solid-state reaction preparation of manganites

Coprecipitation synthesis of La1-xSrxMnO3 (x = 0 – 0.5)

Taloženje kalcijevih fosfata u prisutnosti TiO2 nanomaterijala

Modelling of perovskite solar cells

Keramički materijali iz otopine - prednosti i izazovi

Preparation of Ca1-xSrxMnO3 by coprecipitation

Chemical synthesis of strontium and lanthanum manganite

Catanionic mixtures of structurally different surfactants

Preparation of thin CaMnO3 films

Albumin adsorption on ß-tricalcium phosphate

Some dillemas in Croatian terminology

Deposition of photocatalytically active ZnO layers on substrates of varying geometries

Important persons

Influence of synthesis parameters on photocatalytic activity of ZnO coatings

Theoretical precipitation diagrams of calcium phosphates

Photocatalytic activity of hydrothermally synthesized ZnO structures

Faculty of Chemical Engineering and Technology of the University of Zagreb 1919 - 2019

Activity and stability of ZnO coatings during photocatalytic degradation of pollutants

Preparation of calcium manganite powder for thin film deposition from suspension

Bio and eco - what is behind the hype

Deposition of stable ZnO coatings on substrates with varying geometries

Influence of anodization parameters on morphology and structure of TiO2 nanotube array

Preparation and characterization of films based on TiO2 doped with rare earths

Optimization of calcium manganite synthesis

Stanislav Kurajica and Sanja Lučić Blagojević: Uvod u nanotehnologiju (Introduction to nanotechnology)

Synthesis of porous silica for lipase immobilization

Synthesis and characterization of seed crystals of calcium hydrogen phosphate dihydrate

Influence of chemical deposition conditions on morphology of ZnO films

Optimization of ZnO films for photocatalytic application

Interakcije kristala kalcijevog hidrogenfosfata dihidrata s aminokiselinama

Solid biofuels as renewable energy source

Preparation of ZnO nanoparticles by sol-gel process

Optimization of deposition conditions for transparent coatings from sol

Influence of aminoacids on precipitation of calcium phosphates

Dye-sensitized solar cells based on ZnO and TiO2

In memoriam: Professor Ivan Esih

Professor Röntgen's Rays

In memoriam: Prof. Egon Matijević

Stability of Fe3O4 nanoparticles in model biological media

Organic-inorganic hybrid materials for functional textile against microorganisms

Activity of AMACIZ in 2014 and 2015

Terminology for Aggregation and Self-Assembly in Polymer Science (IUPAC Recommendations 2013)

ICTAC nomenclature of thermal analysis

Glossary of Terms Relating to Thermal and Thermomechanical Properties of Polymers (IUPAC Recommendations 2013)

Faculty of Chemical Engineering and Technology, Self-evaluation Report 2014./2015.

Mining the words

Influence of particle size on sintering of ceramic bodies

Mesoporous silica

Applications of graphene in materials engineering

Enzyme immobilization on mesoporous silica synthesized by sol-gel method

Influence of preparation conditions on crystallization of yttria-stabilized zirconia

Kristalizacija ekvimolarne ZrO2-TiO2 smjese pripravljene sol-gel postupkom

Electron microscopy in characterization of materials

Priprava miješanih oksida ZrO2 i TiO2 sol-gel postupkom

Porosity analysis of silica prepared by sol-gel method

Activity of AMACIZ in the past two years

Influence of precursor nature on sol-gel synthesized porous silica

Epoxy / SiO2 nanoparticles composite materials

Selecting the polymer and organically modified alkoxysilane for the synthesis of porous silica

Thermogravimetric analysis of dental composites

Headache caused by scientific nomenclature

Hounding the χ

Environmental pollution

Preparation of organic-inorganic coatings by sol-gel process

Sol-Gel Synthesis of Porous Silica Modified with GLYMO

Sol-Gel Synthesis of Polymer-Templated Porous Silica

Influence of measurement conditions on results of thermogravimetric analysis

Usporedna kemijska i fizikalna karakterizacija kompozitnih dentalnih materijala

Cure kinetics of organic-inorganic hybrid materials

Loudspeaker Composite Membrane Made of Epoxy Resin Reinforced by Hemp Fibers

World heritage of Krakow

Characterization of organic-inorganic hybrids prepared by sol-gel process

Cure kinetics of organic-inorganic hybrid materials

Definitions of Terms Relating to the Structure and Processing of Sols, Gels, Networks, and Inorganic-Organic Hybrid Materials

Kompoziti na osnovi epoksidne smole i SiO2 nanočestica

Modifikacija tekstilija sol-gel postupkom

Preparation of composite materials from resin reinforced with plant fibers

Methods of deposition of sol-gel coatings

Influence of conditions of hydrolysis on cure kinetics of hybrid materials

Application of sol-gel process for modifying textile surfaces and properties

FKIT on Universities Fair 2010

Celebrating the 40th anniversary of Society of Plastics and Rubber Engineers and the 30th anniversary of the journal Polimeri

YES2010 - workshop of future cooperation

The three most beautiful Japanese landscapes

Identification of the unknown mineral oil samples ; FTIR measurements report

Polymers on Science Festival

Energy from the river mouth

90th anniversary of chemical-engineering studies

Preparation of organic-inorganic hybrid materials based on epoxy resin

Kompozitni i hibridni materijali

"Polymeric materials and additives" conference

Train in the snow, or annual outing of AMACIZ hiking section, March 14th 2010

Influence of precursors on crystallization of zirconium titanate prepared by sol-gel process

Synthesis of organic-inorganic hybrids by sol-gel process

Preparation of nanocomposites based on epoxy resin and silica nanofiller

Optimization of coating conditions to obtain homogeneous coatings from ZrTiO4 sol

Konrad Paul Liessmann: Theory of Miseducation.

Influence of hydrolysis on properties of organic-inorganic hybrid materials based on epoxy resin

Influence of Hydrolysis Conditions on Thermal Properties of Hybrid Materials

Under the sun of Japan

N. Raos: Metals of life - metals of death

Thermal Degradation Kinetics of PS/LDH-B nanocomposites

Degradation of epoxy-silica hybrid materials

Excerpts from Science et Vie

Sol-gel process in preparation of organic-inorganic hybrid materials

Preparation of ZrTiO4 ceramic coatings by sol-gel process

Preparation and characterization of organic-inorganic hybrids based on poly(methylmethacrylate) and organically modified Si-alkoxyde

"My 132 Semesters of Study of Chemistry"

Congress of European Polymer Federation held in Portorož

Presenting a book: Thoughts on (Croatian) science

"Polymeric materials and additives" conference

Seeing Copenhagen from Zagreb

Synthesis of zirconium titanate by sol-gel process

Epoxy-silica organic-inorganic hybrid materials

Research project "Bioceramic, Polymer and Composite Nanostructured Materials"

Priprava cirkonijevog titanata sol-gel postupkom

Impact factor - the number that's devouring science

Sol-gel synthesis of hybrid materials for coating application

A pleasant stroll among poisons

"Polymeric materials and additives" conference

Influence of Cross-linking Agent Quantity on Properties of Organic-Inorganic Hybrid Materials

How to fund science and education?

Copenhagen - or why Heisenberg went to visit Bohr

Bacteria battery

Influence of synthesis parameters on cross-linking reactions of organic-inorganic hybrid materials

Šulek's "Natural laws for everyman" and his scientific terminology

Priprava tankih keramičkih ZrO_2 prevlaka sol-gel procesom

The influence of the type of precursor on the crystallization behavior of pre-cordierite powders prepared by the sol-gel method

Kinetics of Organic-Inorganic Hybrids Formation by Sol-Gel Process

Organic-inorganic hybrids prepared by sol-gel process: setting kinetics and properties

Preparation of organic-inorganic hybrids epoxide/SiO2 by the sol-gel process

Investigations of the kinetics of organic-inorganic hybride formation

Utjecaj vrste prekursora na kristalizacijsko ponašanje pred-kordijeritnih prašaka pripravljenih sol-gel metodom

Preparation of a stable ZrO2-sol for thin ceramic coatings

Synthesis and Characterization of Organic-Inorganic Interpenetrating Polymer Networks

Priprava i karakterizacija organsko-anorganskih hibridnih sustava

Electrochemistry and environment - hydrogen evolution on amorphous Ni-Zr alloys

Electrocatalytic activity of amorphous Ni-Zr alloys for the hydrogen evolution reaction