HrvatskihrEnglishen
Opcije pristupačnosti Pristupačnost
  1. Home
  2. Domagoj Vrsaljko
About employee

Domagoj Vrsaljko

Title: Full professor

Consultations:

Consultations are held by appointment.

Public phone number:
+385 1 4597127
Internal phone number:
127
E-mail:
E-mail
Official web page URL:
https://www.fkit.unizg.hr/domagoj.vrsaljko
Department:
Department of Thermodynamics, Mechanical Engineering and Energy
Graduation year:
2001
PhD graduation year:
2008

Teaching

undergraduate

graduate

doctoral

Open Google Scholar profile Open ResearchGate profile

Scientific publications (CroRIS)

Boček, Željka; Forjan, Elizabeta; Molnar, Andrej; Marković, Marijan-Pere; Vrsaljko, Domagoj; Kassal, Petar
2026.
Micromachines

DEVELOPMENT OF 3D PRINTED FLOW MICROREACTORS FOR PHOTOCHEMICAL REACTION INTENSIFICATION

Stražičić, Karla; Marković, Marijan-Pere; Vrsaljko, Domagoj; Kassal, Petar; Škorić, Irena
2026.

Sander, Aleksandra; Zokić, Iva; Bikić, Antonija; Petračić, Ana; Parlov Vuković, Jelena; Vrsaljko, Domagoj
2026.
Separation and purification technology

Marković, Marijan-Pere; Forjan, Elizabeta; Žižek, Krunoslav; Vrsaljko, Domagoj
2026.
Technologies (Basel)

Boček, Željka; Forjan, Elizabeta; Molnar, Andrej; Marković, Marijan‐Pere; Vrsaljko, Domagoj; Kassal, Petar
2026.

Forjan, Elizabeta; Marković, Marijan‐Pere; Šulek, Katarina; Vrsaljko, Domagoj
2026.
Journal of applied polymer science

From Idea to 3D Printing

Štorga, Lara; Forjan, Elizabeta; Marković, Marijan-Pere; Vrsaljko, Domagoj
2026.

Marković, Marijan-Pere; Forjan, Elizabeta; Žižek, Krunoslav; Vrsaljko, Domagoj
2026.
Technologies (Basel)

PREPARATION OF pH-SENSITIVE FILMS BY IMMOBILIZATION OF AN INDICATOR MIXTURE

Radak, Karla; Felber, Dora; Jelavić, Antonija; Forjan, Elizabeta; Vrsaljko, Domagoj
2026.

Forjan, Elizabeta; Marković, Marijan-Pere; Guyon, Cédric; Vrsaljko, Domagoj
2026.
Optics and laser technology

Mandura Jarić, Ana; Haramustek, Laura; Šeremet, Danijela; Vojvodić Cebin, Aleksandra; Petrović, Predrag; Jokić, Stela; Aladić, Krunoslav; Žižek, Krunoslav; Vrsaljko, Domagoj; Komes, Draženka
2026.
Journal of food engineering

Cingesar, Ivan Karlo; Marković, Marijan-Pere; Vrsaljko, Domagoj
2025.
Chemical engineering and processing

Haramija, Veronika; Vrsaljko, Dijana; Ðurina, Vedran; Vrsaljko, Domagoj
2025.
IEEE transactions on dielectrics and electrical insulation

Mandura Jarić, Ana; Petrović, Predrag; Domazet Jurašin, Darija; Vrsaljko, Domagoj; Nižić Nodilo, Laura; Kuzmić, Sunčica; Kovačević, Monika; Logarušić, Marijan; Slivac, Igor; Komes, Draženka
2025.
Food and Bioprocess Technology

Boček, Željka; Forjan, Elizabeta; Molnar, Andrej; Zubak, Marko; Vrsaljko, Domagoj; Kassal, Petar
2025.

Logar, Mirta; Prebeg, Teodora; Fiala, Emanuel-Nino; Vrsaljko, Domagoj; Matijašić, Gordana
2025.
Journal of drug delivery science and technology

3D Expedition: Mission Invention (MUZZA IV) - Workshop

Forjan, Elizabeta; Marković, Marijan-Pere ; Vrsaljko, Domagoj
2025.

Additive manufacturing in chemical engineering. Part one: Processes for polymers

Vrsaljko, Domagoj; Marković, Marijan-Pere; Cingesar, Ivan Karlo; Car, Filip
2025.
Kemija u industriji : časopis kemičara i tehnologa Hrvatske

Ljubić, Anabela; Vušak, Vitomir; Cingesar, Ivan Karlo; Vrsaljko, Domagoj; Šalić, Anita; Škorić, Irena
2025.
Journal of flow chemistry

Šeremet, Danijela; Tuzla, Barbara; Vrsaljko, Domagoj; Vukosav, Petra; Mišić Radić, Tea; Kuzmić, Sunčica; Žižek, Krunoslav; Sokač, Katarina; Mandura Jarić, Ana; Vojvodić Cebin, Aleksandra; Komes, Draženka
2025.
Food chemistry

Boroša, Vilim Marijan; Koštan, Kristian; Vičević, Renata; Cingesar, Ivan Karlo; Vrsaljko, Domagoj; Zelić, Bruno; Šalić, Anita
2025.

Filković, Mateja ; Vrsaljko, Domagoj
2025.

Forjan, Elizabeta; Marković, Marijan-Pere; Kassal, Petar; Vrsaljko, Domagoj
2025.
Journal of sol-gel science and technology

Do you like 3D printing? (FKIT Open Day 2025) - Workshop

Forjan, Elizabeta; Marković, Marijan-Pere; Cingesar, Ivan Karlo; Vrsaljko, Domagoj
2025.

Marković, Marijan-Pere; Kereković, Irena; Dejanović, Igor; Vrsaljko, Domagoj
2025.

Car, Filip; Zekić, Nikolina; Vrsaljko, Domagoj; Tomašić, Vesna
2025.
Catalysts

Mechanical properties of 3D printed metal parts made of 17-4 stainless steel

Milovac, Matea
2025.

Design and CFD simulation of microfluidic devices for oil/water two-phase flow

Kesić, Tibor Borna
2025.

Mechanical properties of 3D-printed metal parts made of 316L stainless steel

Kopjar, Petra
2025.

Forjan, Elizabeta; Marković, Marijan-Pere; Kučić Grgić, Dajana; Šulek, Katarina; Vrsaljko, Domagoj
2025.

Car, Filip; Gomzi, Vjeran; Tomašić, Vesna; Vrsaljko, Domagoj; Kurajica, Stanislav
2025.
ChemEngineering

Marković, Marijan-Pere; Škorić, Irena; Forjan, Elizabeta; Stražičić, Karla; Jelčić, Antonija; Ljubić, Anabela; Vrsaljko, Domagoj
2025.

Production and characterization of COC/Al functional composites

Cvitkušić, Klara
2025.

Design and 3D printing of a microreactor with integrated FTIR probe for fatty acid methyl ester production

Aščić, Marina
2025.

Production and characterization of COC/Cu functional composites

Šulek, Katarina
2025.

Forjan, Elizabeta; Marković, Marijan-Pere; Kassal, Petar; Felber, Dora; Jelavić, Antonija; Radak, Karla; Vrsaljko, Domagoj
2025.

Marković, Marijan-Pere; Forjan, Elizabeta; Kassal, Petar; Nosić, Anđela; Vrsaljko, Domagoj
2025.
Applied sciences (Basel)

Car, Filip; Horvatić, Dominik; Tomašić, Vesna; Vrsaljko, Domagoj; Gomzi, Zoran
2025.
Catalysts

Marković, Marijan-Pere; Cingesar, Ivan Karlo; Grčić, Ivana; Žaja, Korina; Vrsaljko, Domagoj
2025.
Environmental science and pollution research

Dizajn i izrada 3D-ispisanih mikrofluidnih sustava za protočnu kemiju

Marković, Marijan-Pere
2025.

Marković, Marijan-Pere; Forjan, Elizabeta; Milovac, Matea; Vrsaljko, Domagoj
2025.

Božinović, Marko; Cingesar, Ivan Karlo; Vrsaljko, Domagoj; Zelić, Bruno; Šalić, Anita
2025.
Bioresource technology

Marković, Marijan-Pere; Žižek, Krunoslav; Soldo, Ksenija; Sunko, Vjeran; Zrno, Julijan; Vrsaljko, Domagoj
2024.
Applied sciences (Basel)

Marković, Marijan-Pere; Cingesar, Ivan Karlo; Vrsaljko, Domagoj
2024.
3D printing and additive manufacturing

Cingesar, Ivan Karlo; Marković, Marijan-Pere; Labaš, Ivana; Vukorepa, Gracia; Posavac, Luka; Vrsaljko, Domagoj
2024.

Investigation of mixing efficiency inside microreactors using integrated pH-sensing films

Nosić, Anđela
2024.

Ćevid, Ivana; Cingesar, Ivan Karlo; Marković, Marijan-Pere; Vrsaljko, Domagoj
2024.
Micromachines

Influence of 3D printing parametars on chemical and mechanical properties of poly(vinyl-butiyral) and thermoplastic polyuretane

Sršen, Dora
2024.

Marković, Marijan-Pere; Cingesar, Ivan Karlo; Aščić, Marina; Vrsaljko, Domagoj
2024.

Boroša, Vilim Marijan; Koštan, Kristian; Vičević, Renata; Cingesar, Ivan Karlo; Vrsaljko, Domagoj; Zelić, Bruno; Jurinjak Tušek, Ana; Šalić, Anita
2024.
Micromachines

Sušac, Kristina; Vidović, Elvira; Vrsaljko, Domagoj; Jukić, Ante
2024.
Polymer composites

Mandura Jarić, Ana; Haramustek, Laura; Nižić Nodilo, Laura; Vrsaljko, Domagoj; Petrović, Predrag; Kuzmić, Sunčica; Jozinović, Antun; Aladić, Krunoslav; Jokić, Stela; Šeremet, Danijela; Vojvodić Cebin, Aleksandra; Komes, Draženka
2024.
Foods

Marković, Marijan-Pere; Cingesar, Ivan Karlo; Forjan, Elizabeta; Kassal, Petar; Vrsaljko, Domagoj
2024.

Development of a ceramic monolithic catalyst for the oxidation of aromatic volatile organic compounds using additive manufacturing technology

Tomašić, Vesna; Car, Filip; Matejaš, Andrea; Vrsaljko, Domagoj; Gomzi, Zoran
2024.

Šeremet, Danijela; Žižek, Krunoslav; Žepić, Ivana; Kovačević, Monika; Nižić Nodilo, Laura; Vrsaljko, Domagoj; Katančić, Zvonimir; Sokač, Katarina; Kuzmić, Sunčica; Komes, Draženka
2024.
Food hydrocolloids

Marković, Marijan-Pere; Cingesar, Ivan Karlo; Aščić, Marina; Vrsaljko, Domagoj
2024.

Krivačić, Sara; Zubak, Marko; Vrsaljko, Domagoj; Kassal, Petar
2024.
Electroanalysis

3D Printing — A Smarter Way of Manufacturing (Science Festival 2024) - Workshop

Marković, Marijan-Pere; Cingesar, Ivan Karlo; Nosić, Anđela; Vrsaljko, Domagoj
2024.

3D Printing in Chemical Engineering (FKIT Open Day 2024) - Workshop

Cingesar, Ivan Karlo; Marković, Marijan-Pere; Vrsaljko, Domagoj
2024.

Optimizing the geometry and configuration of 3D-printed modular system for biodiesel synthesis

Cingesar, Ivan Karlo
2024.

Sander, Aleksandra; Petračić, Ana; Vrsaljko, Domagoj; Parlov Vuković, Jelena; Hršak, Patricija; Jelavić, Antonija
2024.
Separations

Let's get to know 3D printing (MUZZA III) - Workshop

Vrsaljko, Domagoj; Cingesar, Ivan Karlo; Marković, Marijan-Pere
2024.

3D Printing — A Smarter Way of Manufacturing (Science Festival 2024) - Lecture

Vrsaljko, Domagoj
2024.

Implementation of photochemical reactions using 3D-printed reactors

Labaš, Ivana
2024.

Cingesar, Ivan Karlo; Marijan-Pere, Marković; Ivana, Labaš; Gracia, Vukorepa; Luka, Posavac; Domagoj, Vrsaljko
2024.

Kopitar, Dragana; Marasović, Paula; Vrsaljko, Domagoj
2024.
Polymers

Kopitar, Dragana; Marasović, Paula; Vrsaljko, Domagoj
2024.
Polymers

Marković, Marijan-Pere; Kassal, Petar; Vrsaljko, Domagoj
2024.
Ieee sensors journal

Bibić, Josip; Cetina-Čižmek, Biserka; Filković, Mateja; Mihelj Josipovic, Tea; Mihoci, Maja; Rožman, Andrea; Vrsaljko, Domagoj
2024.

Filković, Mateja; Mihoci, Maja; Mihelj - Josipović, Tea; Perić, Iva; Vrsaljko, Domagoj
2024.

Ljubić, Anabela; Cingesar, Ivan Karlo; Vrsaljko, Domagoj; Šalić, Anita; Škorić, Irena
2024.

The Birth and Life of a New Technology — 3D Printing (Science Festival 2023) - Workshop

Cingesar, Ivan Karlo; Marković, Marijan-Pere; Forjan, Elizabeta; Vrsaljko, Domagoj
2023.

Mandić, Vilko; Radovanović-Perić, Floren; Panžić, Ivana; Vrsaljko, Domagoj
2023.
Ceramics international

Procjena fizikalno-kemijskih svojstava izolacijskih ulja tehnikama molekulske spektroskopije uz korištenje kemometrijskih metoda i umjetnih neuronskih mreža

Đurina, Vedran
2023.

Characterization and preparation of pH sensor films by the sol-gel method for application in the microreactors

Forjan, Elizabeta
2023.

Fatty acid ethyl ester production in microreactor systems

Ištef, Dino
2023.

Miklec, Kristina; Grčić, Ivana; Radetić, Lucija; Cingesar, Ivan Karlo; Vrsaljko, Domagoj
2023.
Coatings

3D printing of reactors for photochemical reactions

Vuković, Dora
2023.

Car, Filip ; Vrsaljko, Domagoj ; Gomzi, Zoran ; Tomašić, Vesna
2023.

Zubak, Marko ; Ivanišević, Irena ; Vrsaljko, Domagoj ; Kassal, Petar
2023.

Vrsaljko, Domagoj ; Cingesar, Ivan Karlo ; Marković, Marijan-Pere
2023.

Filković, Mateja; Bibić, Josip; Mihelj Josipović, Tea; Vrsaljko, Domagoj
2023.

Miklec, Kristina ; Cingesar, Ivan Karlo ; Grčić, Ivana ; Vrsaljko, Domagoj
2023.

PRODUCTION AND CHARACTERIZATION OF FUNCTIONAL FILAMENT BASED OF CYCLIC OLEFIN COPOLYMER

Labaš, Ivana; Cingesar, Ivan Karlo; Marković, Marijan-Pere; Vrsaljko, Domagoj
2023.

DESIGN AND 3D PRINTING OF DROPLET GENERATORS

Nosić, Anđela; Cingesar, Ivan Karlo; Vrsaljko, Domagoj
2023.

Marković, Marijan-Pere ; Bambić, Leonarda ; Cingesar, Ivan Karlo ; Forjan, Elizabeta ; Vrsaljko, Domagoj
2023.

3D Printing and Chemical Engineering (FKIT Open Day 2023) - Workshop

Cingesar, Ivan Karlo; Marković, Marijan-Pere; Vrsaljko, Domagoj
2023.

Litmus-based sensor films for use in microreactors

Geršak, Inga
2023.

Influence of printing and post-treatment parameters on epoxy resin properties used in digital light processing

Aščić, Marina
2023.

Đurina, Vedran ; Haramija, Veronika ; Vrsaljko, Dijana ; Vrsaljko, Domagoj
2023.

Testing of properties od transparent resin based on epoxides used in 3D printing

Kesić, Tibor Borna
2023.

Car, Filip ; Tomašić, Vesna ; Vrsaljko, Domagoj
2022.

Marković, Marijan-Pere ; Cingesar, Ivan Karlo ; Keran, Laura ; Prlić, Domagoj ; Grčić, Ivana ; Vrsaljko, Domagoj
2022.
Materials

Marković, Marijan-Pere ; Cingesar, Ivan Karlo ; Keran, Laura ; Prlić, Domagoj ; Vrsaljko, Domagoj
2022.

Proizvodnja i karakterizacija funkcionalnog filamenta od PE-LD/TiO2 i PE- LD/TiO2/CNT kompozita

Žaja, Korina
2022.

Car, Filip ; Tomašić, Vesna ; Vrsaljko, Domagoj
2022.

Marković, Marijan-Pere ; Cingesar, Ivan Karlo ; Žaja, Korina ; Dejanović, Igor ; Vrsaljko, Domagoj
2022.

Sander, Aleksandra ; Petračić, Ana ; Zokić, Iva ; Vrsaljko, Domagoj
2022.
Journal of environmental management

Influence of printing parameters on properties of polyacrylate resins used in 3D printing

Vuković, Dora; Cingesar, Ivan Karlo; Vrsaljko, Domagoj
2022.

Vrsaljko, Domagoj ; Car, Filip ; Cingesar, Ivan Karlo ; Marković, Marijan-Pere
2022.

Workshop in the Additive Manufacturing Laboratory at FKIT (FKIT Open Day 2022)

Vrsaljko, Domagoj; Cingesar, Ivan Karlo; Marković, Marijan-Pere
2022.

Cingesar, Ivan Karlo ; Marković, Marijan-Pere ; Vrsaljko, Domagoj
2022.

Methyl red-based sensor films for use in microreactors

Drmić, Katarina Marija
2022.

Production and characterization of functional filament based on cycloolefin copolymer

Labaš, Ivana
2022.

Design and 3D printing of droplet generators

Nosić, Anđela
2022.

Cingesar, Ivan Karlo ; Vrsaljko, Domagoj
2022.

Marković, Marijan-Pere ; Cingesar, Ivan Karlo ; Keran, Laura ; Prlić, Domagoj ; Vrsaljko, Domagoj
2022.

Drmić, Katarina Marija ; Geršak, Inga ; Marković, Marijan-Pere ; Vrsaljko, Domagoj
2022.

Production of Biodiesel in Advanced Millireactor Systems

Katalinić Paić, Iva
2022.

Đurina, Vedran ; Haramija, Veronika ; Vrsaljko, Dijana ; Vrsaljko, Domagoj
2022.
IEEE transactions on dielectrics and electrical insulation

Cingesar, Ivan Karlo ; Marković, Marijan-Pere ; Vrsaljko, Domagoj
2022.
Additive manufacturing

Marković, Marijan-Pere ; Cingesar, Ivan Karlo ; Ivanković, Petra ; Katalinić Paić, Iva ; Pehar, Ines ; Vrsaljko, Domagoj
2022.

Car, Filip ; Brnadić, Gabriela ; Tomašić, Vesna ; Vrsaljko, Domagoj
2022.
Progress in additive manufacturing

Optimization of polymeric millireactors produced by additive manufacturing

Lukić, Marija
2021.

Marković, Marijan-Pere ; Cingesar, Ivan Karlo ; Kassal, Petar ; Vrsaljko, Domagoj
2021.

Photocatalytic oxidation of antibiotics in CPC reactor over TiO2 /CNT - PETG static mixer

Miklec, Kristina ; Loborec, Jelena ; Grčić, Ivana ; Radetić, Lucija ; Marčec, Jan ; Vrsaljko, Domagoj ; Cingesar, Ivan Karlo
2021.

Car, Filip ; Tomašić, Vesna ; Vrsaljko, Domagoj
2021.

Lukić, Marija ; Vrsaljko, Domagoj
2021.
International journal of green energy

Sander, Aleksandra ; Petračić, Ana ; Zokić, Iva ; Vrsaljko, Domagoj
2021.

Cingesar, Ivan Karlo ; Marković, Marijan-Pere ; Sušec, Ivan ; Šoić, Laura ; Vrsaljko, Domagoj
2021.

Design and 3D printing of static mixers for tubular reactor

Muhar, Vedran
2021.

Cingesar, Ivan Karlo ; Katušić, Viktorija, Jozinović, Katarina ; Vrsaljko, Domagoj
2021.

Design and production of a sensor-coated millireactor system

Marković, Marijan-Pere
2021.

Production of millireactor systems with static mixers

Sokolić, Mario
2021.

Marković, Marijan-Pere ; Cingesar, Ivan Karlo ; Kassal, Petar ; Vrsaljko, Domagoj
2021.

Utjecaj parametara ispisa na svojstva poliakrilatne smole korištene u 3D–ispisu

Vuković, Dora
2021.

Influence of curing on the properties of polyacrylate resins used in stereolitography

Cingesar, Ivan Karlo ; Sušec, Ivan ; Šoić, Laura ; Vrsaljko, Domagoj
2020.

Lukić, Marija ; Vrsaljko, Domagoj
2020.

Modifikacija hidrofobnosti površine dvokomponentnih polimernih mješavina za aditivnu proizvodnju mikroreaktora

Lovinčić Milovanović, Vedrana
2020.

Production of microreactors by additive manufacturing technology

Fiket, Lucija
2020.

Influence of curing conditions on the properties of high temperature polyacrylate resin for stereolithography

Drmić, Katarina Marija
2020.

Study of the effect of curing conditions on the application properties of transparent polyacrylate resin used in stereolithography

Sarunović, Šejla
2020.

Lovinčić Milovanović, Vedrana ; Guyon, Cédric ; Grčić, Ivana ; Tatoulian, Michael ; Vrsaljko, Domagoj
2020.
Materials

Proizvodnja mikroreaktora tehnologijom proizvodnje rastaljenim filamentom

Fiket, Lucija ; Sušac, Kristina ; Vrsaljko, Domagoj
2020.

XIII. SUSRET MLADIH KEMIJSKIH INŽENJERA KNJIGA SAŽETAKA


2020.

Production of millireactor systems by stereolithography

Petrić, Valentino
2020.

The influence of fabrication parameters on the mechanical properties of 3D printed parts

Šimonek, Martina
2020.

Proizvodnja mikroreaktora od filamenata cikloolefinskog kopolimera

Sušac, Kristina
2020.

Nutrizio, Marinela ; Gajdoš Kljusurić, Jasenka ; Badanjak Sabolović, Marija ; Bursać Kovačević, Danijela ; Šupljika, Filip ; Putnik, Predrag ; Semenčić Čakić, Mojca ; Dubrović, Igor ; Vrsaljko, Domagoj ; Maltar-Strmečki, Nadica ; Režek Jambrak, Anet
2020.
Innovative food science & emerging technologies

Imobilizacija optičkih senzora na odabrane plastične površine

Cingesar, Ivan Karlo
2020.

Optimiranje rada ekstrudera za proizvodnju poli(etilen-tereftalatnih) filamenata

Horvat, Melani
2019.

Novel static mixers for millireactors

Prlić, Domagoj
2019.

Effect of post-curing time on the physical-chemical, mechanical and thermal properties of polyacrylate resin "High temperature"

Cingesar, Ivan Karlo; Sušec, Ivan; Šoić, Laura; Vrsaljko, Domagoj
2019.

Mechanical properties of materials for fused filament fabrication

Marković, Marijan-Pere
2019.

Hidrofobizacija površine polimera

Katušić, Viktorija
2019.

Priprema monolitnih nosača katalizatora tehnologijom 3D ispisa

Car, Filip ; Tomašić, Vesna ; Vrsaljko, Domagoj
2019.

Lukić, Marija ; Vrsaljko, Domagoj
2019.

Influence of post-curing on properties of resin for stereolithography

Šoić, Laura ; Sušec, Ivan ; Cingesar, Ivan Karlo ; Vrsaljko, Domagoj
2019.

Lukić, Marija ; Valjak, Filip ; Vrsaljko, Domagoj
2019.

3D printing in chemical engineering and biotechnology

Vrsaljko, Domagoj
2019.

3D-ispis u kemijskom inženjerstvu

Vrsaljko, Domagoj
2019.

Imobilizacija optičkih kemijskih senzora na plastične površine

Car, Filip
2019.

Priprema naprednih funkcionalnih filamenata

Brnadić, Gabriela
2019.

Millireactors for the production of FAME

Rajkovača, Nikolina
2019.

Vrsaljko, Domagoj ; Ćevid, Ivana ; Car, Filip ; Rahelić, Tin
2019.
Engineering power : bulletin of the Croatian Academy of Engineering

Optimiranje rada ekstrudera za proizvodnju filamenata cikloolefinskog kopolimera

Pavičić, Iva
2019.

Novi statički mikseri za milireaktore

Đuranović, Božana
2019.

Razvoj statičkih miksera za milireaktore

Ćevid, Ivana
2019.

Lovinčić Milovanović, Vedrana ; Hajdinjak, Ivana ; Lovriša, Ivona ; Vrsaljko, Domagoj
2019.
Polymer engineering and science

Napredna metoda pripreme monolitnih nosača katalizatora tehnologijom 3D-ispisa

Car, Filip ; Brnadić, Gabriela ; Tomašić, Vesna ; Vrsaljko, Domagoj
2019.

Jakšić, Lidija ; Žižek, Krunoslav ; Vrsaljko, Domagoj ; Macan, Jelena
2019.

Study of surface free energy of polymer materials used in additive manufacturing

Lukić, Marija ; Ćevid, Ivana ; Vrsaljko, Domagoj
2018.

Spectroscopic study of aging of the ester-based insulating oil

Vrsaljko, Domagoj; Lješčanin, Albina; Haramija, Veronika
2018.

Thermal properties of polymer materials used in additive manufacturing

Lukić, Marija ; Vrsaljko, Domagoj
2018.

Degradation of polymers during recycling

Đuranović, Božana ; Grgurev, Ivan ; Pavičić, Iva ; Lukić, Marija ; Vrsaljko, Domagoj
2018.

Continuous flow liquid/liquid separator

Cingesar, Ivan Karlo
2018.

Preparation and study of polymer blends based on polylactid

Car, Filip ; Ćevid, Ivana ; El-Sayed, Iman ; Hajdari Gretić, Zana ; Vrsaljko, Domagoj
2018.

The effect of filler addition on the viscosity of polymer melt

Sušac, Kristina
2018.

Vrsaljko, Domagoj ; Lovinčić, Vedrana ; Hajdari Gretić, Zana ; Kereković, Irena ; Guyon, Cédric
2018.

Vrsaljko, Domagoj ; Lovinčić, Vedrana ; Hajdari Gretić, Zana ; Dejanović, Igor ; Guyon, Cédric
2018.

Optimiranje rada ekstrudera za proizvodnju filamenata

Fiket, Lucija
2018.

Preparation and Study of Polymer Blends Based on PLA

Car, Filip ; Ćevid, Ivana ; El-Sayed, Iman ; Hajdari Gretić, Zana ; Vrsaljko, Domagoj
2018.
Kemija u industriji : časopis kemičara i tehnologa Hrvatske

Milliflow Reactors Produced by Additive Manufacturing

Lukić, Marija ; Rahelić, Tin ; Vrsaljko, Domagoj
2018.
Kemija u industriji : časopis kemičara i tehnologa Hrvatske

Millflow reactors produced by additive manufacturing

Lukić, Marija ; Rahelić, Tin ; Vrsaljko, Domagoj
2018.

Dejanović, Igor ; Rahelić, Tin ; Vrsaljko, Domagoj
2018.

Lukin, Stipe ; Tireli, Martina ; Lončarić, Ivor ; Barišić, Dajana ; Šket, Primož ; Vrsaljko, Domagoj ; di Michiel, Marco ; Plavec, Janez ; Užarević, Krunoslav ; Halasz, Ivan
2018.
Chemical communications

Obrada površine polimera silanima

Kremer, Irma
2018.

Ispitivanje fizikalno-kemijskih svojstava polimera koji se koriste u 3d tiskanju

Car, Filip ; Ćevid, Ivana ; Hajdari Gretić, Zana ; Vrsaljko, Domagoj
2018.

The influence of pla polymer blend morphology on the mechanical properties

Vrsaljko, Domagoj ; Marolt, Mateja ; Hajdari Gretić, Zana
2017.

Vrsaljko, Domagoj ; Hajdari Gretić, Zana ; Car, Filip ; Ćevid, Ivana ; Rahelić Tin
2017.

Grčić, Ivana ; Erjavec, Boštjan ; Vrsaljko, Domagoj ; Guyon, Cedric ; Tatoulian, Michael
2017.
Progress in organic coatings

Materials for Microreactor Fabrication

Hajdari Gretić, Zana ; Rahelić, Tin ; Vrsaljko, Domagoj
2017.
Kemija u industriji : časopis kemičara i tehnologa Hrvatske

Optimiranje polimernih mikroreaktora izrađenih aditivnom proizvodnjom

Rahelić, Tin
2017.

The influence of PLA polymer blend morphology on the mechanical properties

Marolt, Mateja
2017.

Optimization of polymeric materials properties for manufacturing of microreactors

Lovrinov, Tea
2017.

Optimization of silane surface treatment of polymers

Katušić, Viktorija
2017.

Ageing of transformer insulation

Fiolić, Tamara
2017.

Optimization of polymeric materials preparation procedure for manufacturing of microreactors

Vugrinec, Nikola
2017.

Hajdari Gretić, Zana ; Car, Filip ; Ćevid, Ivana ; Vrsaljko, Domagoj
2017.

Thermal properties of polymer materials used in additive manufacturing

Lukić, Marija ; Vrsaljko, Domagoj
2017.

Car, Filip ; Ćevid, Ivana ; Hajdari Gretić, Zana ; Vrsaljko, Domagoj
2017.

Lovinčić, Vedrana ; Hajdari Gretić, Zana ; Vrsaljko, Domagoj ; Lovriša, Ivona
2017.

Hajdari Gretić, Zana ; Car, Filip ; Ćevid, Ivana ; Vrsaljko, Domagoj
2017.

Vrsaljko, Domagoj ; Grčić, Ivana ; Guyon, Cédric ; Hajdinjak, Ivana ; Lovinčić, Vedrana ; Hajdari Gretić, Zana
2017.

Ispitivanje fizikalno-kemijskih svojstava polimera koji se koriste u 3D tiskanju

Car, Filip ; Ćevid, Ivana ; Hajdari Gretić, Zana ; Vrsaljko, Domagoj
2017.

Increasing hydrophobicity of two-phase PLA polymer blend surfaces by ICP etching

Lovinčić, Vedrana ; Grčić, Ivana ; Vrsaljko, Domagoj
2016.

Visits to Delft and Rotterdam Universities

Vrsaljko, Domagoj
2016.
Glasnik (Društvo diplomiranih inženjera i prijatelja kemijsko tehnološkog studija u Zagrebu)

Vrsaljko, Domagoj ; Grčić, Ivana ; Guyon, Cédric ; Schelcher, Guillaume ; Tatoulian, Michael
2016.
Plasma processes and polymers

Belščak-Cvitanović, Ana ; Bušić, Arijana ; Barišić, Lidija ; Vrsaljko, Domagoj ; Karlović, Sven ; Špoljarić, Igor ; Vojvodić, Aleksandra ; Mršić, Gordan ; Komes, Draženka
2016.
Food hydrocolloids

Vrsaljko, Domagoj ; Bao, Xujin
2016.
Polymer composites

Perešin, Anita ; Vrsaljko, Domagoj
2016.

The use of nanomaterials in energetics

Mujkanović, Dino
2016.

Production of lignocellulose based biofuels

El-Sayed, Iman
2016.

Materials for the microreactors

Horvat, Tomislav
2016.

Silane surface treatment of polymers

Havliček, Anamarija
2016.

Comparison of mili and microreactors

Dragčević, Valentina
2016.

Production of biodiesel from microalgae

Ćevid, Ivana
2016.

3D printers for microreactor production

Vrsaljko, Domagoj ; Hajdari, Zana
2016.

Modification of mechanical properties of materials used for 3D printing

Lovinčić, Vedrana ; Hajdari, Zana ; Vrsaljko, Domagoj
2016.

The effect of TiO2 on properties of polymer blends based on PLA

Hajdinjak, Ivana
2016.

Optimiranje procesa pripreme punjenih polimernih sustava

Lovriša, Ivona
2016.

Scientific project "Development of materials for 3D printing of microreactors"

Vrsaljko, Domagoj ; Hajdari Gretić, Zana
2016.
Glasnik (Društvo diplomiranih inženjera i prijatelja kemijsko tehnološkog studija u Zagrebu)

Scientific project "Development of materials for 3D printing of microreactors"

Vrsaljko, Domagoj
2016.
Kemija u industriji : časopis kemičara i tehnologa Hrvatske

Thermal analysis of polymers

Šuman, Monika
2015.

Vrsaljko, Domagoj ; Macut, Dejan ; Kovačević, Vera
2015.
Journal of applied polymer science

Grčić, Ivana ; Vrsaljko, Domagoj ; Katančić, Zvonimir ; Papić, Sanja
2015.
Journal of water process engineering

Karakterizacija izolacijskog papira starenog u sintetskom izolacijskom ulju

Kremer, Irma
2015.

Identification of polymeric packaging materials by FTIR spectroscopy

Perešin, Anita
2015.

Why nothing degrades anymore?

Vrsaljko, Domagoj
2015.
Kemija u industriji : časopis kemičara i tehnologa Hrvatske

Karakterizacija površinski aktivnih tvari u frakcijama atmosferskih lebdećih čestica elektrokemijskom metodom

Brlić, Tin
2014.

Haramija, Veronika ; Vrsaljko, Dijana ; Đurina, Vedran ; Vrsaljko, Domagoj
2014.

Vrsaljko, Domagoj ; Macut, Dejan ; Kovačević, Vera
2014.

Kassal, Petar ; Šurina, Robert ; Vrsaljko, Domagoj ; Murković Steinberg, Ivana
2014.
Journal of sol-gel science and technology

Kovačević, Vera ; Vrsaljko, Domagoj ; Lučić Blagojević, Sanja ; Leskovac, Mirela ; Buhin, Zrinka ; Macut, Dejan
2014.

Swale of High-density Polyethylene Bottles

Vrsaljko, Domagoj ; Kovačević, Vera
2014.
Polimeri : časopis za plastiku i gumu

Catalytically active polymer composites

Zorinc, Gregor
2014.

Haramija, Veronika ; Vrsaljko, Dijana ; Đurina, Vedran ; Vrsaljko, Domagoj
2014.
Journal of Energy = Energija

X Meeting of Young Chemical Engineers : book of abstracts


2014.

Haramija, Veronika ; Vrsaljko, Dijana ; Đurina, Vedran ; Vrsaljko, Domagoj
2014.

Study of the insulating oil ageing

Lješčanin, Albina
2014.

Potential role of nanofiller as a compatibilizer in immiscible PLA/LDPE blend

Kovačević, Vera ; Vrsaljko, Domagoj ; Macut, Dejan
2014.

Croatian Professional Terminology Should be Developed and Promoted Constantly

Vrsaljko, Domagoj
2013.
Kemija u industriji : časopis kemičara i tehnologa Hrvatske

Cooperation with KONČAR - Electrical Engineering Institute Inc.

Vrsaljko, Domagoj
2013.
Glasnik (Društvo diplomiranih inženjera i prijatelja kemijsko tehnološkog studija u Zagrebu)

Investigation of bio-polymer blends based on polylactide

Macut, Dejan
2013.

Gilbert, Marianne ; Ho, Kok Chin ; Hitt, David J. ; Vrsaljko, Domagoj
2013.
Polymer degradation and stability

Optimiranje procesa pripreme polimernih mješavina poliuretana i poli(vinil-acetata)

Vrsaljko, Domagoj ; Kolar, Ana ; Kovačević, Vera
2013.

Grčić, Ivana ; Šipić, Ana ; Koprivanac, Natalija ; Vrsaljko, Domagoj
2012.
Ultrasonics sonochemistry

Vrsaljko, Domagoj
2012.

Gilbert, Marianne ; Chin Ho, Kok ; Hitt, David J. ; Vrsaljko, Domagoj
2012.

Matijašić, Gordana ; Žižek, Krunoslav ; Puškaš, Mirna ; Vrsaljko, Domagoj
2012.

Cindrić, Ines ; Vrsaljko, Domagoj ; Grčić, Ivana ; Koprivanac, Natalija
2012.

Cindrić, Ines ; Grčić, Ivana ; Vrsaljko, Domagoj ; Koprivanac, Natalija
2012.

Optimizing the process of preparing filled polymer systems

Kolar, Ana
2012.

Interface optimization in polymer blends

Štefanac, Ivan
2012.

Influence of titanium dioxide on low-density polyethylene properties

Kratofil, Toni
2012.

Lučić Blagojević, Sanja ; Vrsaljko, Domagoj ; Leskovac, Mirela ; Buhin, Zrinka ; Kovačević, Vera
2011.

Utjecaj predobrade nanopunila na svojstva HIPS/SiO2 kompozita

Turković, Martina
2011.

Thermal properties of HIPS/CaCO3 composites

Đurašević, Marko
2011.

Influence of surface nanofiller pre-treatment on the properties of LDPE/CaCO3 composites

Baneković, Monika
2011.

Brostow, Witold ; Kumar, Puneet ; Vrsaljko, Domagoj ; Whitworth, Jenna
2011.
Journal of nanoscience and nanotechnology

Vrsaljko, Domagoj ; Hrnjak-Murgić, Zlata ; Lučić Blagojević, Sanja ; Leskovac, Mirela ; Kratofil Krehula, Ljerka ; Ptiček Siročić, Anita ; Katančić, Zvonimir ; Kovačević, Vera ; Jelenčić, Jasenka
2011.
Journal of composite materials

Gilbert, Marianne ; Chin Ho, Kok ; Hitt, David J ; Vrsaljko, Domagoj
2011.

Preparation and properties of composites with CaCO3 nanoparticle fillers

Krstić, Marina ; Vrsaljko, Domagoj ; Kovačević, Vera
2010.

Polymers - from the primeval beginning to plastics and elastomers

Čatić, Igor ; Barić, Gordana ; Cvjetičanin, Nenad ; Galić, Kata ; Godec, Damir ; Grancarić, Ana Marija ; Katavić, Ivan ; Kovačić, Tonka ; Raos, Pero ; Rogić, Ana ; Rujnić-Sokele, Maja ; Vranješ, Nina ; Vrsaljko, Domagoj ; Andričić, Branka
2010.
Polimeri : časopis za plastiku i gumu

Preparation and properties of composites with CaCO3 nanoparticles

Krstić, Marina
2010.

Brostow, Witold ; Kovačević, Vera ; Vrsaljko, Domagoj ; Whitworth, Jenna
2010.
Journal of Materials Education

Zimmermann, Boris ; Vrsaljko, Domagoj
2010.
Polymer testing

Lučić Blagojević, Sanja ; Leskovac, Mirela ; Kovačević, Vera ; Buhin, Zrinka ; Vrsaljko, Domagoj ; Hitrec, Petra
2010.

Zimmermann, Boris ; Vrsaljko, Domagoj
2010.

Tribology of Polymeric Materials. Part 1. Friction and wear of polymeric materials

Kovačević, Vera ; Vrsaljko, Domagoj ; Brostow, Witold
2009.
Polimeri : časopis za plastiku i gumu

Effect of CaCO3 surface modification and mixing procedure on properties of PU/PVAc blends

Vrsaljko, Domagoj ; Krstić, Marina ; Habuš, Ana ; Kolar, Ana ; Kovačević, Vera ; Leskovac, Mirela
2009.

Leskovac, Mirela ; Lučić Blagojević, Sanja ; Vrsaljko, Domagoj ; Fiamengo, Ivona ; Kovačević, Vera
2009.

Optimization of PUR/PVAC mechanical properties by addition of mixture of untreated and pretreated CaCO3 filler

Vrsaljko, Domagoj ; Leskovac, Mirela ; Buhin, Zrinka ; Lučić Blagojević, Sanja ; Kovačević, Vera
2009.

Tribology of Polymeric Materials Part 2. Properties and tribological behaviour of polymeric materials

Kovačević, Vera ; Vrsaljko, Domagoj ; Brostow, Witold
2009.
Polimeri : časopis za plastiku i gumu

Adhesion phenomena in poly(vinyl acetate)/silica composites

Vinceković, Nives ; Kozjak, Igor ; Vrsaljko, Domagoj ; Leskovac, Mirela
2008.

Study of interface phenomena in composites and polymer blends

Vrsaljko, Domagoj
2008.

The Role of the Interface in the Multiphase Polymer Systems Filled with Nanoparticles

Kovačević, Vera ; Vrsaljko, Domagoj ; Leskovac, Mirela ; Lučić Blagojević, Sanja ; Buhin, Zrinka
2008.
Polimeri : časopis za plastiku i gumu

Vrsaljko, Domagoj ; Leskovac, Mirela ; Lučić Blagojević, Sanja ; Kovačević, Vera
2008.
Polymer engineering and science

Vrsaljko, Domagoj ; Šmit, Ivan ; Kovačević, Vera
2008.
Materials research innovations

Vrsaljko, Domagoj ; Lučić Blagojević, Sanja ; Leskovac, Mirela ; Kovačević, Vera
2008.
Materials research innovations

Kovačević, Vera ; Vrsaljko, Domagoj ; Lučić Blagojević, Sanja ; Leskovac, Mirela
2008.
Polymer engineering and science

Kovačević, Vera ; Lučić Blagojević, Sanja ; Leskovac, Mirela ; Vrsaljko, Domagoj
2008.

Vrsaljko, Domagoj ; Leskovac, Mirela ; Lučić Blagojević, Sanja ; Kovačević, Vera
2008.

Interface properties modeling in poly(vinyl acetate)/silica composites

Leskovac, Mirela ; Lučić Blagojević, Sanja ; Vrsaljko, Domagoj ; Fiamengo, Ivona ; Kovačević, Vera
2008.

Lučić Blagojević, Sanja ; Leskovac, Mirela ; Vrsaljko, Domagoj ; Kovačević, Vera
2007.

Vrsaljko, Domagoj ; Leskovac, Mirela ; Lučić Blagojević, Sanja ; Kovačević, Vera
2007.

Kovačević, Vera ; Vrsaljko, Domagoj ; Lučić Blagojević, Sanja ; Leskovac, Mirela
2007.

The influence of surface treated silica nanofiller on the interface properties in polystyrene composites

Leskovac, Mirela ; Štefanić, Karlo ; Lučić Blagojević, Sanja ; Vrsaljko, Domagoj ; Kovačević, Vera
2007.

Kovačević, Vera ; Leskovac, Mirela ; Lučić Blagojević, Sanja ; Vrsaljko, Domagoj
2007.

Jirouš-Rajković, Vlatka ; Bogner, Andrija ; Mihulja, Goran ; Vrsaljko, Domagoj
2007.
Wood research (Bratislava)

Lučić Blagojević, Sanja ; Kovačević, Vera ; Leskovac, Mirela ; Vrsaljko, Domagoj
2006.

Kovačević, Vera ; Leskovac, Mirela ; Lučić Blagojević, Sanja ; Vrsaljko, Domagoj
2006.

Kovačević, Vera ; Leskovac, Mirela ; Lučić Blagojević, Sanja ; Vrsaljko, Domagoj
2006.

The surface energy determination of CaCO3 fillers by using different models

Vrsaljko, Domagoj ; Kovačević, Vera ; Leskovac, Mirela ; Lučić Blagojević, Sanja
2005.

Micro and Nanocomposite PVAc and PU Materials and Adhesion

Lučić Blagojević, Sanja ; Kovačević, Vera ; Leskovac, Mirela ; Vrsaljko, Domagoj
2005.
Kemija u industriji : časopis kemičara i tehnologa Hrvatske

Kovačević, Vera ; Leskovac, Mirela ; Lučić Blagojević, Sanja ; Vrsaljko, Domagoj
2005.
Macromolecular symposia

Leskovac, Mirela ; Kovačević, Vera ; Lučić Blagojević, Sanja ; Vrsaljko, Domagoj ; Volovšek, Vesna
2004.
E-Polymers

Kovačević, Vera ; Lučić-Blagojević, Sanja ; Leskovac, Mirela ; Vrsaljko, Domagoj
2004.

Changes of PU/CaCO3 nanocomposite mechanical properties by AMPTES and GPTMS silane surface CaCO3 filler modification

Vrsaljko, Domagoj ; Lučić Blagojević, Sanja ; Leskovac, Mirela ; Kovačević, Vera
2004.

Compatibilization possibility of poly(vinyl chloride) and polypropylene by surface modified filler

Andričić, Branka ; Kovačić, Tonka ; Klarić, Ivka ; Leskovac, Mirela ; Vrsaljko, Domagoj
2004.

Lučić Blagojević, Sanja ; Kovačević, Vera ; Leskovac, Mirela ; Vrsaljko, Domagoj ; Volovšek, Vesna ; Christoph, Nover
2004.
E-Polymers

Nanokompozitni polimerni materijali i adhezija

Lučić Blagojević, Sanja ; Kovačević, Vera ; Leskovac, Mirela ; Vrsaljko, Domagoj
2004.

Lučić-Blagojević, Sanja ; Kovačević, Vera ; Leskovac, Mirela ; Vrsaljko, Domagoj ; Volovšek, Vesna ; Nover, Christoph ;
2003.

Kovačević, Vera ; Leskovac, Mirela ; Lučić Blagojević, Sanja ; Vrsaljko, Domagoj
2003.

Leskovac, Mirela ; Kovačević, Vera ; Lučić-Blagojević, Sanja ; Vrsaljko, Domagoj ; Volovšek, Vesna ; Ranogajec, Franjo
2003.

Kovačević, Vera ; Lučić-Blagojević, Sanja ; Hrnjak-Murgić, Zlata ; Leskovac, Mirela ; Vrsaljko, Domagoj
2003.

Structure and properties of poly(vinyl acetate)/CaCO3 nanocomposites prepared by in situ polymerization

Leskovac, Mirela ; Kovačević, Vera ; Lučić-Blagojević, Sanja ; Vrsaljko, Domagoj ; Skarpa, Davorin
2003.

Changing the properties of poly(vinyl acetate) by addition of modified CaCO3 nanofiller

Lučić-Blagojević, Sanja ; Kovačević, Vera ; Leskovac, Mirela ; Vrsaljko, Domagoj
2003.

Changes of the polymer material properties by nanofiller addition

Kovačević, Vera ; Lučić-Blagojević, Sanja ; Leskovac, Mirela ; Vrsaljko, Domagoj ; Volovšek, Vesna
2002.
More information about publications

Awards and acknowledgments

Platinum medal at International Warsaw Invention Show – IWIS 2017 for Laboratory polymer filament extruder for 3D printing of microreactors; awarded by Association of Polish Inventors and Rationalizers, Warsaw University of Technology, Patent Office of the Republic of Poland, Warsaw, 9-11 October 2017

Gold medal, Best Invention, 6th World Competition of Chemical Inventions for Laboratory polymer filament extruder for 3D printing of microreactors; awarded by International Federation of Inventors' Associations (IFIA), Warsaw, 9-11 October 2017

List of select projects

SCIENTIFIC PROJECTS

  • 1. HRZZ-IP-2022-10-8004 „DesIgn aNd 3D printInG of micrOreactor systems for Industry 4.0 (INDIGO)“
    Project leader: Domagoj Vrsaljko
  • Croatian-Franch program „Cogito“ Partnership Hubert Curien for 2017/2018 "Plasma technology for the development of polymeric materials for catalytic microreactors"; bilateral IRCP Paris Tech – FKIT
    Project leader in Croatia: Domagoj Vrsaljko (FCET, University of Zagreb), Project leader in France: Cédric Guyon (IRCP ParisTech),
  • 3Dmicroreactors - "Development of materials for 3D printing of microreactors" HRZZ 2015.–2018.
    Project leader: Domagoj Vrsaljko
  • Schaefer Kalk "Study of spherical CaCO3 filler addition on properties of high ‐quality polymer composites", 2011-2012).
    Project leader: Domagoj Vrsaljko
  • NZZ PostDoc project "Surface and interface phenomena in nanoparticulate filled composites", 2010. Loughborough University, Department of Materials - UK).
    Project leader: Domagoj Vrsaljko

Past employments

2021 – now Full Professor, Faculty of Chemical Engineering and Technology, University of Zagreb

2018 – 2021 Associate Professor, Faculty of Chemical Engineering and Technology, University of Zagreb

2013 – 2018 Assistant Professor, Faculty of Chemical Engineering and Technology, University of Zagreb

2001 – 2013 Higher Assistant/Scientific Associate, Faculty of Chemical Engineering and Technology, University of Zagreb

TEACHING ACTIVITIES (Courses): 1. Mechanics of materials; 2. Exercises in materials engineering; 3. Process equipment in ecoengineering; 4. Process equipment; 5. Nano- and micromechanics of materials; 6. Chemical engineering exercises; 7. Ecoengineering exercises; 8. Additive manufacturing in chemical engineering